Copper Coat
-
Frank
- Midshipman
- Posts: 106
- Joined: Sun Nov 12, 2006 8:56 pm
- Location: United Kingdom
- Contact:
Copper Coat
We have had the bottom of Hummingbird our Fantome stripped back to gel coat, now it’s stripped we are about to get it copper coated, however have got my doubts. Do I copper coat or go back on with gel shield and anti foul.
-
Folly Reach
- Captain
- Posts: 440
- Joined: Thu Jul 15, 2010 1:03 pm
- Location: United Kingdom
Re: Copper Coat
You will need a boot top...it doesn't look attractive. Also be aware that each year it will need a slight abrade to keep its effectiveness ....
-
Folly Reach
- Captain
- Posts: 440
- Joined: Thu Jul 15, 2010 1:03 pm
- Location: United Kingdom
Re: Copper Coat
I forgot to mention if you gelshield the first coat of antifoul needs to be applied within a prescribed period of time, from memory possibly 24 hours.
-
Josh M
- Gunner
- Posts: 18
- Joined: Fri Nov 25, 2016 11:54 am
- Location: United Kingdom
Re: Copper Coat
Hi Frank
I run a boat yard on the east coast happy to talk you through the pro and cons of Coppercoat we normally apply it to between 30 to 35 boats a year our record being 38 in a single year.
if you look at our website www.syharbour.co.uk
there are several does and don'ts when applying it and looking after it
so i you need any advice just give me a ring at the harbour
Kind regards
josh
I run a boat yard on the east coast happy to talk you through the pro and cons of Coppercoat we normally apply it to between 30 to 35 boats a year our record being 38 in a single year.
if you look at our website www.syharbour.co.uk
there are several does and don'ts when applying it and looking after it
so i you need any advice just give me a ring at the harbour
Kind regards
josh